General Information
Introduction
The PsiCorp Hyena Penis received a complete overhaul as part of the 6.0 series updates. Using photographic reference, we once more set out to get an even better product, trying to replicate the anatomical details of the male hyena. Cross-referencing the similar, female anatomy, we created this version, resembling the female genitals more than before, alluding to the fact that male and female hyenas are often times difficult to tell apart.
List of Features
- Nine poses available, ranging from soft to fully erect, to laying on your stomach
- A large variety of textures, with several different styles: natural, smooth, and latex
- Full material based shading, creating a realistic shine, and juicy looking wet/cum effects
- An all-new HUD, designed to be easy to use while taking up little space when closed
- Optional pre-installed piercings that can be customized and toggled individually
Box Contents
After your purchase, the following items should have been inside the box you got from the vendor:
- Two pierced & non pierced
- PsiCorp Bits HUD
- Manual notecard
- Main store landmark
- Texture applier
Should you find any of these items to be missing after opening the box, please file a customer support ticket and we will address the issue.
How to update your product
To update, simply visit any in-world vendor or redelivery terminal and touch it, this will present you with access to the CasperVend redelivery site, where every purchase you have made from us is listed.
If, for any reason, one or more products are missing, please file a support ticket here on psicorp.freshdesk.com, and provide the product names, along with your SL name, and a snapshot of each missing item with the edit window open on it, so that we may verify the creator name and your product ownership. We will then add the missing item(s) to your account as soon as possible :)
Product Controls
Here we talk about the various means to control your product, whether via the HUD or through text commands
The HUD
Included with your purchase will be a basic PsiCorp Bits HUD. It will auto-detect any worn PsiCorp bits and display them on its main menu. You only ever need to wear one bits HUD at a time, and it is recommended to always use the latest HUD version available to you.
NOTE: The HUD included with all purchases is a basic hud. It comes with male-only fertility options. If you wish to engage in pregnancy play, please purchase the full Fertility HUD, which is only sold separately, due to its wide range of features and complex pregnancy scripting.
NOTE: While the poseball rezing mechanisms have spam prevention, we are not responsible for any abuse of this system. Please be respectful and do not attempt to use the sex poses in inappropriate places. We take no responsibility for any consequences resulting from mis-use of the poseball system.
Text Commands
State Controls
These states change the appearance of the vagina, changing it into various states of arousal or exposure.
/5hide | Hides the penis entirely |
/5soft | Displays the flaccid penis |
/5limp | Displays the penis slightly erect |
/5droop | Displays a semi-erect state |
/5hard | Shows the fully erect penis |
/5short | A short version of the fully erect state, to prevent clipping during sex |
/5raised | An angled version of the fully erect state |
/5onbelly | Shows the penis laying on the wearer's stomach |
Effects
All particle effects are toggle-able, meaning that you can turn the effect on and off via the same command.
/5cum | Triggers a squirting cum effect |
/5pee | Triggers a constant stream of pee |
/5pre | Triggers a slow, steady drip of precum |
/5backcum | Triggers a backward facing cum effect, to simulate cumming inside a partner |
/5backpee | Triggers a backward facing pee effect, to simulate urinating inside a partner |
/5clean | Clears away any current texture effects |
/5lovejuice | Shows a glossy wetness layer on the penis, may be used in conjunction with condom |
/5cumcover | Shows a glossy cum covering on the penis |
/5condom | Shows a condom layer on the penis. If cum is triggered while worn, the condom tip inflates |
Miscellaneous
These are general commands that control various aspects of the penis.
/5throb |
Toggles an animated throbbing effect on and off |
/5throb strength <5 - 30> |
Controls the strength of the throbbing effect, may be anywhere from 5 to 30 |
/5autohide <hide, soft, none> |
Controls the default appearance of the penis upon being attached, either hidden, closed, or disabled |
/5intensity <0.1 - 1.0> |
Controls the strength and size of the particle effects, may be used while effects are playing |
/5tilt <increment> | Rotates the penis up and down to align it during sex, increments are in degrees such as 15 or -20, positive values tilt up, negative values down |
/5tilt | By itself, resets the tilt angle |
/5settilt | Saves the current tilt angle to be the new default |
/5physics <mode> | May be either off, low, or high. Changes wether and how the balls & full condom tip respond to tilting. Low prevents them from rotating, high also prevents the balls from moving at all from the tilt command. |
/5balls | Toggles the visibility of the balls |
/5balls scale <increment> | Controls the relative size of the balls. Increments are fractions of 1, so 0.25 for a 25% size increase. Negative values reduce size |
/5balls scale | Without increment, resets the relative balls scale back to 1.0 |
/5bulge | Toggles the display of a pants bulge object that shows when the penis is hidden |
Recoloring
If you want to set your penis to precisely specified colors, you are able to use text commands.
For these, you need to specify which part you wish to color (shaft or sheath) and which color. The color must be specified as an RGB value, consisting of 3 digits, each ranging from 0 to 255.
The color can be read from the SL color picker, or any other color picker source. Below is an example of the color function being used to tint the shaft:
/5 color flesh 128 255 32
Shininess
If you wish to edit how shiny and/or reflective the bits are, you can use the /5shiny command.
The syntax is as follows:
/5shiny <part> <R,G,B> <shiny> <environment>
Part may be either sheath or shaft, and the R/G/B color has to be in the 0-255 range, without spaces within the brackets.
Shiny and environment correspond directly to the SL material spinner settings, so you may use these to get the look you desire, then use the command to lock it into the bits.
Below is an example that can be used to tone down the default shininess of most PsiCorp bits and make it less noticeable, while still providing a nice effect:
/5shiny shaft <128,128,128> 60 0
Texturing
With all v6 bits, there are multiple styles, one being realistic textures, the next being a smooth variant of them, ideal for toonier or smooth shaded avatars, and the last is a latex set, with lots of shine and reflectivity, intended for latex avatars. Textures may be changed via the "/5 texture" command, followed by either "sheath" or "shaft", and lastly by a name of the texture set, for example:
/5 texture shaft natural
Available texture sets are:
Realistic
- natural
- dark
- grey
- black
Smooth
- smoothnatural
- smoothdark
- smoothgrey
- smoothblack
Latex
- latexskin
- latexgrey
- latexblack
Sheath
- smooth
- latex
- fur
Custom textures
With the included texture applier, you may freely add custom textures to your bits. For that, simply rez and click the applier, and you will be presented with a menu that allows you to configure custom textures for any existing PsiCorp bits. See the link below for PSD files of the textures used in this product, which you may freely edit for your personal mods or market them to other people, provided you give credit and do not attempt to re-sell the original files themselves.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article